Montreal 21

HARO elastic sports coating

Area-elastic sports floor

This product is available in the following varieties:

Information

  RAL

When quick installation and high performance is required, model Montreal makes the choice. This model features the HARO module technology – this means, the most time-consuming assembly part has already been done in the HARO factory. Model Montreal consists of two components – the HARO elastic layer and the HARO load-distribution modules made of top quality plywood. Load-distribution modules made of plywood are the premium solution for highest quality demands, providing highest loading capacities for multi-purpose use and an outstanding performance.

The elastic layer is laid out loosely in the entire hall. The 2.50 x 1.25 m (8’ 2’’ x 4’ 1’’) load distribution modules are installed on top and screwed together. High-speed installation!

Model Montreal needs to be installed on an even sub-floor. The slab should be level according to DIN 18202:1997-04, Figure 3, or it must be levelled subsequently. This can be done, for example, with dry or liquid levelling compounds.

The construction height of Model Montreal 21 is only 39 mm and therefore the perfect choice for renovation projects. Montreal 21 fully meets the requirements of the German DIN V standard 18032-2; April 2001, EN 14904. It is subject to the quality control RAL GZ 942 and a national technical approval (“bauaufsichtliche Zulassung”) has been granted for this product.When quick installation and high performance is required, model Montreal makes the choice. This model features the HARO module technology – this means, the most time-consuming assembly part has already been done in the HARO factory. Model Montreal consists of two components – the HARO elastic layer and the HARO load-distribution modules made of top quality plywood. Load-distribution modules made of plywood are the premium solution for highest quality demands, providing highest loading capacities for multi-purpose use and an outstanding performance.

The elastic layer is laid out loosely in the entire hall. The 2.50 x 1.25 m (8’ 2’’ x 4’ 1’’) load distribution modules are installed on top and screwed together. High-speed installation!

Model Montreal needs to be installed on an even sub-floor. The slab should be level according to DIN 18202:1997-04, Figure 3, or it must be levelled subsequently. This can be done, for example, with dry or liquid levelling compounds.

The construction height of Model Montreal 21 is only 39 mm and therefore the perfect choice for renovation projects. Montreal 21 fully meets the requirements of the German DIN V standard 18032-2; April 2001, EN 14904. It is subject to the quality control RAL GZ 942 and a national technical approval (“bauaufsichtliche Zulassung”) has been granted for this product.