Model: Montreal 21 C
(Area-elastic sports floor)
When quick installation and high performance is required, model Montreal makes the choice. This model features the HARO module technology - this means, the most time-consuming assembly part has already been done in the HARO factory. Model Montreal consists of two components - the HARO elastic layer and the HARO load-distribution modules made of top quality plywood. Load-distribution modules made of plywood are the premium solution for highest quality demands, providing highest loading capacities for multi-purpose use and an outstanding performance.
The Montreal 21C was developed especially for container transport - 1.100m² Montreal 21 C fits in one 40'ft container.
The elastic layer is laid out loosely in the entire hall, the 2.00x 1.25 m (6' 5’’ x 4’ 1’’) load distribution modules are installed on top and screwed together. High-speed installation!
Model Montreal must be installed on an even sub-floor. The slab should be level according to DIN 18202:1997-04, Figure 3, or it must be levelled subsequently. This can be done, for example, with dry or liquid levelling compounds.
The construction height of Model Montreal 21 C is only 38 mm and therefore the perfect choice for sports and multi-purpose use. Montreal 21 C fully meets the requirements of the German DIN V standard 18032-2; April 2001, EN 14904. It is subject to the quality control RAL GZ 942 and a national technical approval (“bauaufsichtliche Zulassung”) has been granted for this product.